Official Samsung Galaxy J5 SM-J500M DS Stock Rom
Official Samsung Galaxy J5 SM-J500M DS Stock Rom
The Samsung Galaxy J5 is a mid-range smartphone that was released in June 2015. It has a 5-inch HD display, a quad-core Snapdragon 410 processor, 1.5 GB of RAM, 8 GB or 16 GB of internal storage, a 13 MP rear camera, a 5 MP front camera, and a 2600 mAh battery. The device runs on Android 5.1.1 Lollipop out of the box, and can be upgraded to Android 6.0.1 Marshmallow or Android 7.1.1 Nougat.
If you own a Samsung Galaxy J5 SM-J500M DS (dual SIM) model, and you want to restore your device to its original factory settings, you can download and flash the official stock firmware from Samsung. The stock firmware is useful if you want to unroot your device, fix any software issues, or revert back to the official Android version.
Official Samsung Galaxy J5 SM-J500M DS Stock Rom
How to download the official stock firmware for Samsung Galaxy J5 SM-J500M DS
There are several sources where you can download the official stock firmware for your device. Here are some of them:
: This website provides links to download the stock firmware for various Galaxy J5 models, including the SM-J500M DS. You can choose the firmware based on your country and carrier.
: This website is a reliable source for downloading Samsung firmware files. You can find the firmware for the SM-J500M DS model with the ZTO (Brazil) region code.
: This website provides a detailed guide on how to flash the stock firmware on your device using Odin software. You can also download the firmware file from the link provided.
Before you download the firmware file, make sure you check the model number and region code of your device. You can find them by going to Settings > About device > Model number and Settings > About device > Software information > CSC code. You should only flash the firmware that matches your device's model number and region code.
How to flash the official stock firmware on Samsung Galaxy J5 SM-J500M DS
After you download the firmware file, you need to extract it to get the .tar.md5 file. You also need to download and install Odin software on your computer, which is a tool that allows you to flash firmware files on Samsung devices. You can download Odin from .
Before you flash the firmware, make sure you backup your data and charge your device to at least 50%. You also need to enable USB debugging mode on your device by going to Settings > Developer options > USB debugging. If you don't see Developer options, go to Settings > About device > Software information and tap on Build number seven times.
Follow these steps to flash the official stock firmware on your device:
Turn off your device and boot it into Download mode by pressing and holding Volume Down + Home + Power buttons together for a few seconds. When you see a warning screen, press Volume Up to continue.
Connect your device to your computer using a USB cable.
Launch Odin software on your computer. You should see an "Added!" message in the log box and a blue or green light in the ID:COM port.
Click on the AP button and browse for the .tar.md5 file that you extracted from the firmware file.
Make sure that only Auto Reboot and F. Reset Time options are checked in Odin.
Click on Start button and wait for the flashing process to complete. You should see a "PASS!" message in Odin and your device should reboot automatically.
Disconnect your device from your computer and wait for it to boot up normally.
Congratulations, you have successfully flashed the official stock firmware on your Samsung Galaxy J5 SM-J500M DS. You can now enjoy the original Android experience on your device.